A QRP Quiz Question

 

I have the answer from an excellent and authoritative source.  

Here is the question:  The rig I bought for one dollar at Winterfest was produced by MXM Industries of Smithville Texas.  What does "MXM Industries" mean?  Why was this the name of the company? 

The Doug DeMaw Article that got me into Homebrew Double-Sideband

Just click on the images for a better view

Pete WB9FLW asked for this.  This was an important article for me -- it paved the way for my entry into homebrew phone gear -- this article was the basis for my first DSB transmitter, built in the Azores. 

I think Doug was a bit optimistic in saying that SSB operation was possible with this rig.  Maybe it was possible for Doug, but for most of us DSB is just a LOT easier to get going than SSB.  (I know that some people don't believe this, but I note that most of these folks have built neither DSB nor SSB rigs.  It always seems easier before you start to melt solder.)  

Be sure to check out the 10 meter DSB rig recently built by Mike WU2D.  He has 6 or 7 good videos on this project, including this one: https://www.youtube.com/watch?v=xThoAMv4zrw

Another CW Contact with the SupeRX/TX 40 (Video)

I changed the crystal in the transmitter.  I got a different rock from Mouser and am now on 7030.  

Wednesday April 3, 2024. On 40 meters in the afternoon with Mike KM4KY in North Carolina.

MXM SupeRX/TX 40 Rig Info

 

My SupeRX/TX 40 -- now on 7030 kHz

Click on schematics for a better view

Details on the receiver: https://archive.org/details/73-magazine-1991-04

Details on the transmiiter: https://archive.org/details/73-magazine-1991-12/page/10/mode/2up

Article on MXM Industries of Smithville,Texas:  

https://www.worldradiohistory.com/Hambrew_Magazine.htm

Click on images for a better view

Click on images for a better view

A QRP CW Contact (Video) with the Winterfest MXM SupeRX/TX 40 (1 Watt, Crystal Controlled Transmitter)

I picked this transceiver up at Winterfest for one dollar. 40 meters. Superhet receiver with 455 kc ceramic filter and 2 NE602s. Crystal controlled one watt transmitter on 7039.5 kc. I emailed Jeff KA2BKG and asked him to slide up a bit to my freq. I am glad he did. Thanks Jeff.

KD0FNR's Amazing San Francisco TouCans Rig -- A Rockmite and a Tuna Topper in a Pineapple Can Mounted on the Dipole in a Shopping Bag

Click on the image for a better look

This post has a definite San Francisco vibe. 

Hamilton KD0FNR appeared on the SolderSmoke blog way back in 2011.  Perhaps he should join forces with N6ASD who lives quite close to him in SF, and seems to share radio interests.  Also in their area is the esteemed Bay Areas blogger and homebrewer Dave AA7EE ; Dave recently sounded the CBLA alarm, alerting us to the presence of an intruder on 3579 kHz.  In the process, Dave mentioned the Pt. Reyes Web SDR, the presence of which came as welcome news to Hamilton. Finally, Dave and Hamilton mention the KPH Web SDR, which brings to mind Dick Dillman W6AWO who has been on the SolderSmoke blog several times.  

Hamilton and his kids have their rig (a Rockmite and a Tuna Topper in a Dole Pineapple can) mounted at the feedpoint of their dipole (in the red shopping bag above).   They link to it via WiFi and Bluetooth. FB.  Thomas Witherspoon has a nice presentation (by KD0FNR) of the TouCans project on his blog: https://qrper.com/2023/12/field-radio-kit-gallery-kd0fnrs-rockmite-20-and-tuna-topper/ 

Hamilton KD0FNR writes: 

At the moment, the kids whose dad I am, better known as the gang—12, 10, and 8 year-old Diaze, Mota, and Tawnse.. all internet aliases—are big into 20 meters QRP CW with Project TouCans, a Rockmite coupled to a Tuna Topper. The radio and the amp that popped us out of QRPp to plain-old QRP are both housed in a Dole Pineapple can with a tuna can as a cover and antenna mount. The whole rig is still very much mounted in our half-wave dipole! 

Project TouCans consists of a Rockmite feeding a 5 Watt Tuna Topper, all of which is housed in our dipole antenna. The Rockmite has a single crystal bandpass filter on it's rx input. That makes it a pretty wide reciever which is fine, but it's particularly sensitive to its tx frequencies, 14075.5 and 14058 kHz AND—for some reason I have yet to understand—10459 kHz. By watching the SDRs that now—thanks Dave—envelope us here at our home QTH in San Francisco, we can see the frequencies of incoming signals. That information keeps me from responding to 14059 kHz signals in vain.

And now, the headphone repeater: TouCans is completely wireless with respect to the ground. That means there's no power line, no feedline, no keyer lines and no headphone line. Keyer controls are handled via wifi to a Raspberry Pi Pico-W on the rig while audio is brought back to my headphones via Bluetooth. Power is provided by a USB-C battery pack that lives in the rig which is mounted above us in the antenna. (Yes, all of this is becuase I thought feedlines matches and baluns were too mystical and hard to understand years ago. Yes, this has probably all been more work than a balun. Yes, I am still totally enamored of my original design decision. :) ) Anyway, the bluetooth range is about 50 feet and the wifi range is shorter than that. The short of it is—pun not intended—that I can't quite use the rig while I'm in my office. But, I can send CQ to the rig every half minute or so via a memory keyer, then turn on the SDR in my office, and then sprint a bit closer to the rig when someone calls back. (It helps that houses in SF are a bit tiny.) So, SDRs are kinda an integral part of our QTH setup and it's awesome to learn about a new—to us—one! Thanks again!

Radio Items Picked-up at VWS Winterfest 2024 Hamfest

As always, click on image for a better view

Above you can see what I picked up at the Vienna Wireless Society's 2024 Winterfest Hamfest. 

-- On the left in the blue box is an MXM Industries SuperRX/TX 40 transceiver. It is a kit from a Texas company.   Superhet receiver with IF at 455 kHz.  Crystal controlled CW transmitter on 7040 kHz.  The oscillator works, but so far no receive signals.  I will have to troubleshoot.  Does anyone have a schematic? 

-- Behind the MXM there is a nice box marked "Diode Detector" I opened it up and there is just a solid state diode and a 50 ohm resistor to ground.   Box may be useful. 

-- I got a couple of books: "Weekend Projects" 1979 from ARRL, and "A History of QST -- Volume 1 Amateur Radio Technology 1915 - 2013" 2013 from ARRL. 

-- On top of the Weekend Projects book you see a "Crystal Holder" from Gross Radio of New York City.  W1UJR has some good history on this company:  https://w1ujr.com/written-word/gross-radio-company-circa-1931/  This device seem to be intended to hold in place a raw piece of quartz!  Cool. 

-- To the right of the books there is a serious-looking VFO.  One dollar!  Deal!  It is a CB VFO, but the markings say it puts out 5.44 to 5.99 MHz.  So it should be useful.  The dual speed dial is very nice.  

-- Above the VFO is a nice step attenuator from the "Arrow Antenna" company of Loveland Colorado. 

-- Further to the right are some Electric Radio and Antique Wireless Association magazines that Armand WA1UQO gave me.  Really nice.  The AWA mags have a very thoughtful piece (warts and all) on Jean Shepherd.  And the ER pile has an article by Scott WA9WFA that mentions my work on the Mate for the Mighty Midget receiver.  Thanks again Armand! 

-- I also got some ADE6+ surface mount mixers.  The price was right! 

Thanks to VWS for putting on this great hamfest! 

We Get Mail! Red Poster? Really a Tapestry from Ecuador

Listener Tobias was laid up yesterday, following the extraction of wisdom teeth. (This seems like an appropriate follow-up to our talk in SolderSmoke Podcast #250 of sBITX "wisdom files" to correct FFT "hallucinations.") Tobias does not appear to have been hallucinating, but he was having trouble seeing what he thought to be a "red poster" in my shack.  

In fact, what he was seeing was a red tapestry from Ecuador that was sent to me by Galo Constante HC1GC way back in 1993.  I was in the Dominican Republic, running my first ever real homebrew transmitter.  Here is an article about this project: https://www.gadgeteer.us/TXHB.HTM  I think Galo was also QRP homebrew.  My log shows that I worked  him eight times from the DR. 

Mitad del Mundo =  Middle of the World (a reference to the equator). 

Here is the QSL I got from Galo: 

Here's a 2022 blog post about a resurrection of this old rig: 

https://soldersmoke.blogspot.com/2022/09/fixing-up-old-homebrew-rig-barebones.html

Thanks Tobias for spotting the HC1GC tapestry and reminding me of some great QRP contacts. I hope you feel better OM.  73  Bill 

QRP Trigger Warning! 500 kW from WLW (great video)

Wow, this video will make you appreciate the simplicity of QRP! 

My favorite part was when they required the use of "dark welding goggles" for whoever was charged with a visual check of  the tube filaments.  

Thanks to Hack-A-Day for alerting me to this wonderful video. 

AA9IL's Sputnik Tube, Altoids Tin Transmitter

November 24, 2023

Hello Bill

I have just built an tested a 20 meter “Sputnik” transmitter. It uses two Soviet era “rod” tubes and is fixed tuned to 14.060 MHz.  I was able to compress the design to fit in an Altoids tin. The plate tuning capacitor was replaced with a fixed capacitor value closest to the variable for peak power out. Plate voltage is 90 volts and I key both the oscillator and PA via the B+ line. Power output is around 200mW and my first test transmission from the Chicago area was picked up 864 miles away on the east coast via the Reverse Beacon Network. It was definitely Joy of Oscillation and Joy of Transmission!

73, Mike

AA9IL

EN52

----------------

Mike's rig has been heard by many Reverse Beacon Network stations: 

------------------

November 29, 2023

Bill: 

I started a QSO with AC2C in Ellicott, MD who responded to my CQ but the band dropped (20m)

But that’s a good start and I’ll keep at it!  So, yay!

73 Mike

-------------------

Here are some earlier blog post on rigs using Soviet rod tubes: 

https://soldersmoke.blogspot.com/search?q=Sputnik+tubes

A Low-Power (QRP) Contact from Australia to Spain (with video from both sides!)

A recent comment on the blog put me back in contact with an old friend of SolderSmoke:  Paul VK3HN.  Paul is an amazing homebrewer -- it was great to hear from him.   He sent along this video of a portable Summit on the Air activation from the Melbourne Australia area.   Paul managed to contact Ignacio EA2BD in Spain.  Ignacio was also running low power with a portable set up.  The remarkable thing is that we have video from both sides of the contact.  FB!  Thanks to Paul and Ignacio. 

Ciprian YO6DXE Puts the Michigan Mighty Mite on AM! (video)

Excellent work Ciprian!  

Here we have a Michigan Mighty Mite being modified for AM in Romania, with input from Hungary, and inspiration from Melbourne, Australia (Peter Parker VK3YE).  With a very nice shout-out to SolderSmoke.  

I really like Ciprian's emphasis on having fun with the electronics. 

TRGHS! 

Sam WN5C Builds a Michigan Mighty Mite and Takes it to Lake Thunderbird

 

Sam WN5C built a Michigan Mighty Mite and then went the extra mile by putting it on the air from a field location.  And what a great name this location has for a QRP operation:  Lake Thunderbird. 

Sam wrote up his experiences for K4SWL's QRPer blog: 

https://qrper.com/2023/05/guest-post-lake-thunderbird-k-2792-with-a-homebrew-transmitter/  

Below is a picture of the rig.  NOTE THE LOW-PASS FILTER.  FB OM. We wouldn't want that rig tearing up the electromagnetic spectrum. 

Looking ahead, Sam writes: 

Next step is a DC receiver (maybe the high school receiver?) and then a more substantial transmitter married together, I think. This is all incredibly fun.

Thanks Sam! 

George Heron N2APB talks about Coherent CW at FDIM: Interview #7 by Bob Crane W8SX

It was great to hear George's voice again.  I was a big fan of his "Chat with the Designers" podcast. And it was great to see that Pete Eaton WB9FLW (an old friend of SolderSmoke) was also involved in this presentation.  

At FDIM George was talking about Coherent CW.  Now, my views on CW have been made quite clear, but I am going to deliberately avoid snide comments about how Coherent CW might be a contradiction in terms.  Thank you.   I think this is something that Pete N6QW and I can agree on. 

Nevertheless, this is all technically interesting.  This reminds me of what happens with WSPR.  But I wasn't quite sure what George was getting at with his discussion of the phase of the incoming signal -- I can see the need to get the receivers' narrow filter exactly on the transmitting station's frequency, but why the phase?  

Here is Bob Crane's interview with George: 

http://soldersmoke.com/N2APB23.mp3

And here are a couple of things with background info on CCW. 

https://www.sigidwiki.com/wiki/Coherent_CW

http://www.arrl.org/files/file/Technology/tis/info/pdf/7509026.pdf

Thanks George, thanks Pete, and thanks Bob. 

Eric Schwartz WA6HHQ of Elecraft -- FDIM Interview #4 by Bob Crane W8SX (audio)

 

It was really cool that our correspondent at FDIM caught up with Eric Schwartz WA6HHQ of Elecraft.  Some highlights from the interview: 

-- Eric met Wayne Burdick through the NORCAL 40 (Wayne had designed it, and Eric was writing articles about it).  That was a very influential rig -- it was the basis for a book and a CALTECH course by David Rutledge. 

-- Elecraft has a strong QRP element in its DNA. 

-- The K2 is "Heathkit style" and offers the builder the opportunity to understand the rig at the component level. 

-- Eric says that using something you built yourself is worth at least 10db. 

Here is Bob's interview with Eric:  

http://soldersmoke.com/WA6HHQ23.mp3

Thanks Eric and thanks Bob.  

Retro QRP Rigs of the 1960's, 70's, and 80's -- Video by Mike WU2D

It is time to put aside (again!) all of the heated ideological arguments about the power level that defines "low power."  Just sit back and enjoy this wonderful trip down QRP memory lane. 

Mike's description of the simple, single-transistor QRP transmitter was really nice.   I recently made something similar: https://soldersmoke.blogspot.com/2023/02/first-qso-with-high-school-receiver-100.html  And Mike does a nice plug for our beloved Michigan Mighty Mite.  Go CBLA! 

The modular idea:  words to live by my friends. 

40673!  TT2!  And G3RJV's PW Severn - indeed, bow your heads!

Wow, the Ten Tec Power Mite (or Might!) -- I still want one.  Same for the Argonaut -- what a great name (sounds like a "magic carpet), and with SSB to boot!  I want to join the Argonaut cult! 

I have both the HW-7 and HW-8 (the HW-8 is heading to the Dominican Republic).  This video makes me want to fire up the HW-7.  Maybe on 40.  

My 40 meter homebrew rig (Digi-Tia) has in it the filter from that old Yaesu FT-7 rig.  The filter was given to me by Steve "Snort Rosin" Smith.  https://soldersmoke.blogspot.com/2015/05/bitx-digi-tia-build-update-2-installing.html  

Thanks to Mike for including me in the credit roll at the end.  What a great group of people -- it is a real honor to be listed with those folks. 

More Info on the Cuban Jaguey Solid State DSB Transceiver

ZL2BMI Transceiver Layout (not full size here!) 

Continuing our search for information the Cuban "Jaguey" DSB rig, Trevor Woods pointed me to Dick Pascoe's QRP column in the (below) July 1998 issue of Ham Radio Today.  I think the first SPRAT article about Eric Sears' ZL2BMI DSB rig was in SPRAT 83 in the summer of 1995.  This fits well with the sequence described below by Arnie Coro CO2KK. 

I am still looking for a schematic and pictures of the Jaguey rig: If you can help in this, please let me know.  

First QSO with the High-School Receiver -- 100 mW to Dipole. (with videos) -- Homebrew to Homebrew!

  

Alan W4AMV in Raleigh NC

Dean KK4DAS and I have been working with a local high school.  The students are building a direct conversion receiver for 40 meters.  

We've been giving out prizes for the first team to complete each stage.   I wanted to give one of the teams a little oscillator that could b heard with their receiver.  So this morning, using a 7040 crystal from the AF4K (SK) company, I threw together a one transistor oscillator.  It has just 8 parts, including the key:

https://makerf.com/posts/ten-minute-transmitter  

I had a low pass filter in the antenna tuner.  The antenna was a low-to-the-ground 40 meter dipole.  The transmitter was putting out around 100 milliwatts.   

N2CQR's Ten Minute Transmitter

The Reverse Beacon Network showed that I was getting out quite well: 

Then I thought, wait a second, let's make a contact with the prototype high-school direct conversion receiver.  

With the receiver hooked up, I again called CQ on 40 CW.  BOOM!   Very quickly Alan W4AMV in Raleigh NC  came back to my call.  Wow!  That's 222 miles.  And a quick check of QRZ.com revealed that Alan is a homebrewer.  Then Google reminded me that his work has been featured on the SolderSmoke blog.    TRGHS. 

I was so excited during this contact that I almost forgot to film it.  But I did manage to get some short clips of the QSO in progress.   You have to listen carefully, but you can hear our calls in there while Alan is transmitting (listen for the lower tone): 

(83) W4AMV as heard in DC RX - YouTube

And in this clip you can watch me transmit using the 10 Minute Transmitter: 

(83) N2CQR transmitting with 10 minute transmitter to W4AMV - YouTube

UPDATE (Feb 27 2023):  I asked Alan about the rig he was using:  "A PLL EXCITER DRIVING A PAIR OF FETS PUSH PULL ABT 50 w to an inverted L at 55 feet. The Rx a single conversion 9 MHz IF and it is connected to an active antenna in the trees out in the woods abt 25 feet up. Uses an automotive whip antenna about 3 feet long. "

Alan's Rig

This little contact is a reminder of the fun that can come from using simple, homebrew, QRP gear.  It is really amazing that the very first contact with this receiver was with another homebrew station.   This all reminds Dean and me of something we have been telling the students:  the little DC receiver they are building is not a toy -- it is capable of being used in real, long-distance contacts.

Thanks Alan!    

Working Walter KA4KXX from Hispaniola

 Walter KA4KXX in Orlando has been a prolific builder of rigs for many years, and has been a great friend of SolderSmoke:  Here are some of the SolderSmoke podcasts and blog posts in which Walter's solder melting was mentioned: https://soldersmoke.blogspot.com/search?q=KA4KXX

As we approach the end of our current stay in the Dominican Republic, I could not miss out on the chance to work Walter with his homebrew rigs.  Even though the space weather was stormy, and my dipole was droopy, we arranged to meet up on the high end of the 20 meter CW band this morning.   See the results in the video above.  A solid QSO with Walter.  He says it is HB2HB, but truth be told I was on a uBITX that was built more by Farhan than by me.  But this was a great contact.  Walter started with a 50W rig, then switched to his 3 watt rig with a DC receiver.  FB

Here is the e-mail I received from Walter after the QSO: 

Dear Bill:

Many thanks for the great video, and when

you return to Virginia look for your mailman

to bring a postcard from me!

Just after your phone call this morning I scanned

the band from 14.025 to 14.300 and heard only one

SSB QSO at 14.347, and even now I only hear

a half dozen SSB signals, so that makes what

we did even more amazing. 

The first photo below is my 3.5 watt NE602 direct conversion 

rig which is about 2 years old.  The transmit signal is created

by putting a 3 MHz VFO signal into an NE602 mixer with an 

11 MHz crystal, so the rig can receive CW and SSB from 

14.025 to 14.300 and can transmit CW anywhere in that range

with good frequency stability. 

The bottom photo is my new full break-in CW 50W rig which 

I just put on the air about a week ago and is still in the finalization stage.  

I am not yet happy with it, but then again I am more particular

now than I used to be.  It is really a trans-receiver with a single 

conversion superhet receiver at the bottom of the board using 

an NE602 pair with a 3-crystal 4 MHz 900 Hz bandwidth filter, 

and a single 10.080 crystal VFO which is tuned with a polyvaricon

for operating between 14.061 and 14.068 MHz.  

At the top is the VXO transmit section using a pair of 14.070 

crystals pulled down into the operating range.  This signal

is buffered and amplified to about 500 mW which is all that 

the MRF101 RF Power Amplifier needs.  Visible behind the

board is an AC-powered 24 VDC switching power supply which 

is connected in series with the 12 VDC battery to 

power the final stage with about 36 VDC.  The main 12 VDC is 

provided by a bench power supply which is not in the photo.

In both rigs the morse code key is the microswitch 

at the lower right corner.  (Way more handy and elegant 

than your key, I might say?)

This morning each of these rigs was connected to its own

end fed half wave antenna, one in my backyard 

and the other on the side of my house.  My antenna analyzer

shows them to be essentially equal, but my 50W rig does

not like one of them at all.

Making our international homebrew-to-homebrew contact 

today was a terrific ham radio experience, so thanks for all 

you do!

73,

Walter 

KA4KXX

Orlando, FL

Fixing Up An Old Homebrew Rig -- Barebones Superhet and VXO 6 Watter

 

I'm not exactly sure why I pulled this old rig off the shelf, but I'll write up what I did -- I often use this blog as a kind of notebook.  I can look back and easily see what I did on my last encounter with the rig. 

The receiver is Doug DeMaw's Barebones (aka Barbados) Superhet.  This was my first superhet receiver. I built in in 1997.   The transmitter was my first real homebrew project -- it is the VXO 6 watter from QRP classics.  I built it in the Dominican Republic, probably in 1993 or 1994.  I built the power supply so that I could say that the entire rig is homebrew. 

This rig is getting a bit long in the tooth:   The receiver is built with 40673 Dual-Gate MOSFETs, an some of the transistor cans have gotten rusty.  The frequency readout on the receiver is the top of a coffee can fitted onto the reduction drive behind the tuning knob from a Drake 2-B (not MY 2B!). 

Here are two 2013 videos that I did on this receiver: 

https://soldersmoke.blogspot.com/2013/03/video-of-my-barebones-superhet.html

-- I put the crystal filter back in CW mode.  I had widened it so that I could listen to 20 meter SSB, but I decided to go back to its original configuration.  When I built the receiver in 1987, I didn't characterize the crystals -- I just used the capacitor values that Doug DeMaw had in his article.  I pretty much did that again this time, just putting caps that are close in value to what Doug had.  DeMaw used color burst crystals at 3.579 MHz.  So I guess this would be a GREAT receiver for the Color Burst Liberation Army!  

-- I used My Antuino (thanks Farhan!) to check the passband.  Here is what it looks like.  I just put the Antuino across the 10k resistors on either side of the input and output transformers.  The coil cores had become very loose -- I just tried put them in the right place.  I may need to put some wax in there to allow them to better stay in place. I think they could have used toroids instead -- that would have been easier. One of the transformer connections was open -- they don't work well that way,  once I fixed that, the passband looks like this: 

-- Each of the horizontal divisions is 500 Hz.  The passband is not pretty, but it is OK, and I  didn't feel like doing too much work on this to get it in better shape. 

-- The filter peak was a bit lower in frequency than expected.  I found that trimmer cap C3 in series with the BFO crystal would not allow me to lower its frequency sufficiently.  So I moved C3 to a position in parallel with the crystal.  With this mod, I could get the BFO frequency to 3578.69.  This produces a 690 Hz tone when the received signal is at the peak of the IF passband.  Opposite sideband rejection is quite good. 

March 2013 Rebuild of the VXO 6 watter

-- I didn't have to do any real work on the transmitter.  The RF amplifier in the transmitter had served for a time as the RF amp in by 17 meter DSB rig (I had added a bias circuit, which I removed when I put the amplifier back in Class C).  Some time ago I rebuilt the oscillator circuit (which had been literally cut off the board when I used the amplifier in the DSB rig). 

-- I did have to reconfigure the muting circuit -- the T/R switch in the transmitter switches the antenna and also -- through a two wire circuit -- cuts off 12 V DC to the transmitter when in receive mode. 

-- For sidetone I just put a small piezo buzzer through a 1k resistor between 12 V DC and the key line. 

It all worked fine -- I talked to three stations on the high end of  the 20 meter CW band.